Composite Decking Compression Strength: What It Means for Your Deck

Composite Decking Compression Strength: What It Means for Your Deck. A composite deck with wood railings, built by Dawn Construction

By Dawn Construction. Reviewed by Matan Four, Owner. Updated November 2026.

Compression strength is how much pressure a composite deck board can take before it crushes. Spec sheets list two numbers: an ultimate value from lab tests and a lower design value meant for real decks. For a Seattle-area deck, the label, the joist spacing, and the framing under the boards matter more than any single number.

What is compression strength in composite decking?

Compression strength measures how well a board resists being squeezed. Spec sheets usually show it two ways:

Term What it means Where it matters on a deck
Compression parallel Pressure along the length of the board Boards used as stair treads or edge pieces carrying load along their length
Compression perpendicular Pressure pushing down on the face of the board Furniture legs, planters, grills, and the spots where boards sit on joists
Ultimate value The load at which a lab sample fails A lab number, not a building number
Design value A much lower number used for real-world design The number that accounts for temperature, moisture, and safety margin

As an example, one major composite maker’s specification lists compression parallel at 1,588 psi ultimate and 540 psi design, and compression perpendicular at 1,437 psi ultimate and 540 psi design. The same specification notes that ultimate values aren’t meant for design, and that its design values apply up to 130°F.

How do you read a composite decking spec sheet?

Focus on what affects your deck, not the biggest number on the page.

  1. Look for the design values. These are the numbers engineers and builders use. Ultimate values only show how a lab sample failed.
  2. Check the allowed span. The span tells you how far apart the joists can be for that board. It’s what keeps a deck from feeling bouncy.
  3. Check the temperature note. Composite boards get softer as they heat up, so design values are given up to a stated temperature.
  4. Find the label and code report. The residential code requires composite deck boards and stair treads to carry a label showing their performance ratings under ASTM D7032, and to be installed as those ratings require.

Is composite decking strong enough for a deck in Washington?

Yes, when it’s installed the way its label requires. In practice, the strength of a deck comes from the whole system, not just the boards.

Part of the deck What it does What we check
Deck boards Carry people and furniture between joists The label, span, and fastening rules for the board
Joists Carry the boards Spacing that matches the board’s rated span
Beams and posts Carry the joists Sizes for the deck’s height and load
Footings Carry everything into the ground Solid footings below wet surface soil
House connection Ties the deck to the house A properly fastened and flashed connection

Washington designs residential decks for a 60 psf live load, higher than the 40 psf used in many other states. That load is carried by the frame, so the framing is sized for it, and the boards are installed to their rated span on top.

How does composite decking handle heavy items like hot tubs?

Heavy, concentrated loads are a framing question, not a board question. A hot tub, a large planter, or an outdoor kitchen puts a lot of weight on a small area. That spot needs framing designed for it, and sometimes extra posts and footings underneath. Tell us about any heavy items at the estimate so the deck is built for them from the start.

How does composite decking hold up in Seattle-area rain?

Composite boards don’t rot like wood boards, which is a big reason homeowners in our climate choose them. A few things still matter in the wet months:

  • Moss and mildew can grow on the surface in shady spots. Regular cleaning keeps the deck safe and looking good.
  • The frame underneath is still wood on most decks, so it needs the right treated lumber, flashing at the house, and drainage gaps between boards.
  • Gaps let water drain. Board spacing follows the maker’s instructions so water and debris can clear.
  • Wet boards can be slippery. Keeping the surface clean helps, especially on stairs and shaded areas.

Comparing materials? See composite vs cedar vs pressure-treated decking.

Does composite decking get hot in the sun?

It can. Composite boards can feel warm on summer afternoons, and lighter colors usually stay cooler than dark ones. That’s also why spec sheets give design values up to a stated temperature. In the Seattle area, shade, deck orientation, and color choice all make a difference.

What affects the cost of a composite deck?

Every deck is priced individually. You get a written quote after a free in-home estimate, and financing is available.

Cost factor Why it matters
Size More square feet means more framing, decking, and labor
Board line and color Composite lines and finishes differ
Joist spacing and patterns Diagonal or picture-frame patterns can need closer framing
Height and slope Taller posts and bigger footings on raised decks
Railings and stairs Style, material, and number of stairs
Heavy items Hot tubs and outdoor kitchens need extra framing
Old deck removal and permit Demolition, disposal, drawings, and inspections

How Dawn Construction can help

Dawn Construction builds composite, cedar, and pressure-treated decks across Greater Seattle and the Puget Sound, from offices in Renton and Mukilteo. We’re TrexPro certified and install Trex, TimberTech, Fiberon, and other composite brands. We match the framing to the board’s rated span and Washington’s deck load, plan for heavy items, and handle the permit. See our composite deck building services. Every project comes with a one-year workmanship warranty, and we’re rated 4.9 on Google.

FAQ

What is compression strength in composite decking?

It’s how much pressure a board can take before it crushes, measured along the board’s length (parallel) and on its face (perpendicular).

What’s the difference between ultimate and design values?

Ultimate values come from lab samples tested until they fail. Design values are much lower and are the numbers used for building real decks.

Is composite decking strong enough for a hot tub?

The boards aren’t the deciding factor. A hot tub needs framing, posts, and footings designed for its weight.

Do composite deck boards need a label?

Yes. The residential code requires composite deck boards and stair treads to carry a label showing their performance ratings under ASTM D7032.

How much load must a deck carry in Washington?

Washington designs residential decks for a 60 psf live load, higher than the 40 psf used in many other states.

Does composite decking rot in the rain?

Composite boards don’t rot like wood boards, but moss and mildew can grow on the surface, and the wood frame underneath still needs the right lumber and flashing.

Does composite decking get hot?

It can on sunny summer days. Lighter colors usually stay cooler, and spec sheets give design values up to a stated temperature.

Planning a composite deck?

Get a free in-home estimate and a written quote. Book your composite deck estimate, or call (206) 672-1711, Sunday–Friday, 8am–10pm. See all our deck services.

Sources

  1. ICC, 2021 International Residential Code, Chapter 5 (Section R507, decks): https://codes.iccsafe.org/content/IRC2021P2/chapter-5-floors
  2. Trex, Composite Decking specification (Section 06 73 00): https://www.trex.com/content/dam/trex/literature/construction-architectural-specifications/trexmd_014520.doc
  3. Washington State Building Code Council, 2018 IRC review worksheet (60 psf deck live load): https://sbcc.wa.gov/sites/default/files/2020-01/ga_Truncated%20121218_2018%20IRC%20Master%20Review%20Worksheet.pdf

Planning a renovation? Let's talk about your project.

  • Licensed, bonded & insured · WA Lic. #DAWNCCW747K2
  • One-year workmanship warranty
  • Free in-home estimates
  • Rated 4.9 on Google
Talk to our team(206) 672-1711Sunday–Friday, 8am–10pm

Request your free estimate

Tell us about your project. We'll call you to confirm a time for your free in-home estimate.

No obligation. We only use your details to contact you about your project.

Call Us Today(206) 672-1711
    Call (206) 672-1711Free Estimate