
Plumbing for Your Remodel
Plumbing for kitchen, bathroom, and whole-home remodels: new fixtures, moved sinks and showers, pipe replacement, and gas lines, with the permits and inspections handled.
Get Your Free Remodel Estimate
Tell us about your project. We'll call to confirm a time that works for you.
- Kitchen, bath & whole-homePlumbing for your remodel
- Permits & inspectionsHandled for you
- Compliant fixturesMeet Washington rules
- Licensed & insuredWA Lic. #DAWNCCW747K2
- Rated 4.9 on GoogleBy local homeowners
- Prefer to talk?Call (206) 672-1711
What's Included in Remodel Plumbing
Plumbing for Remodels in Seattle & the Puget Sound
Dawn Construction handles the plumbing for kitchen, bathroom, and whole-home remodels in 45 cities across Greater Seattle and the Puget Sound, from new fixtures to moved sinks, showers, and gas lines, with the permits and inspections handled so your remodel passes inspection.
Who Can Do Plumbing Work in Washington?
Washington has strict rules for plumbing. If you’re paying someone to do plumbing work, the installer must be a certified journey-level plumber who is a registered contractor or works for one. Homeowners may do their own plumbing on their own home, but a permit and inspection are still required.
Permitted, inspected plumbing protects your home, your insurance, and your resale value.
| Who Does the Work | Allowed? | Permit and Inspection? |
|---|---|---|
| Certified plumber, through a registered contractor | Yes | Yes |
| Homeowner, on their own home | Yes | Yes |
| Paid handyman without plumber certification | No | Not applicable |
Kitchen Plumbing
| Project | What’s Involved |
|---|---|
| New sink and faucet, same spot | Fixture swap and new connections |
| Moving the sink | New supply and drain lines, venting, and a permit |
| Island sink | Supply and drain lines run to the island, with proper venting |
| Dishwasher | Water supply, drain connection, and power |
| Gas range | Gas piping with a permit and inspection |
See our full kitchen remodeling services.
Bathroom Plumbing
| Project | What’s Involved |
|---|---|
| New toilet and vanity, same spot | Fixture swap with new connections |
| Tub-to-shower conversion | New shower valve and drain, often a permit |
| New shower valve | Pressure-balance or thermostatic valve |
| Moving the toilet or shower | New drain lines and venting, and a permit |
| Adding a bathroom | New supply, drain, and vent lines, plus building and plumbing permits |
See our full bathroom remodeling services.
Washington Fixture Rules
Washington sets stricter water limits than national standards. A fixture bought online from out of state may not be allowed here, so we choose fixtures that comply before ordering.
| Fixture | Washington Rule | National Standard |
|---|---|---|
| Toilet | 1.28 gallons per flush maximum | 1.6 gallons per flush |
| Showerhead | 1.8 gpm at 80 psi, WaterSense certified | 2.5 gpm |
| Two or more showerheads on one valve | 1.8 gpm combined | No combined limit |
More detail: bathroom remodel rules for toilets, showers, and fans.
Plumbing Permits
| Where You Live | Who Issues Plumbing Permits |
|---|---|
| Seattle and much of King County | Public Health – Seattle & King County (plumbing and gas piping) |
| Renton | The City of Renton, with over-the-counter trade permits typically issued the same day |
| Other cities | Your city or county; we check at the estimate |
A permit is usually needed when you add or move fixtures, run new water or drain lines, or work on gas piping.
Signs Your Remodel Needs Plumbing Work
- You’re changing the layout: moving a sink, toilet, or shower means new lines.
- Old or failing pipes: leaks, low pressure, or discolored water.
- Slow or noisy drains: often a venting or slope problem.
- Converting a tub to a shower: new valve and drain work.
- Adding a bathroom or island sink: new supply, drain, and vent lines.
- Switching gas to induction: the gas line is capped and inspected.
How Remodel Plumbing Works with Dawn
Step 1: Free In-Home Estimate
We review your layout, existing pipes, and fixtures, and send a written quote.
Step 2: Fixture Selection
You choose fixtures; we confirm they meet Washington’s rules.
Step 3: Permits
We file the plumbing permit for your area.
Step 4: Rough-In & Inspection
Supply, drain, and vent lines are run, then the rough-in is inspected.
Step 5: Finish & Fixtures
Walls close up and fixtures are installed and tested.
Step 6: Final Inspection & Walkthrough
Final inspection, and a walkthrough with you.
Plumbing Cost – What to Expect
Plumbing is priced as part of your remodel. You get a written quote after a free in-home estimate.
| Price Factor | Effect on Cost |
|---|---|
| Moving fixtures | Relocating a sink, toilet, or shower adds new lines and venting |
| Fixtures | Standard versus premium faucets, valves, and toilets |
| Access | Crawlspace, basement, or slab affects how lines are run |
| Old pipes | Replacing aging lines while walls are open |
| Gas work | New gas piping adds its own permit and inspection |
Want to spread the cost? See our financing options.
What Makes Our Remodel Plumbing Different
- Inspected work: every plumbing job permitted and inspected where required.
- One plan for the whole remodel: plumbing coordinated with the layout, cabinets, and finishes.
- Permits handled: we file and schedule every inspection.
- Compliant fixtures: toilets, showerheads, and valves that meet Washington rules.
- Clear pricing: a written quote after a free in-home estimate.
- One-year workmanship warranty: on every completed project.
Planning a Remodel?
Get a free in-home estimate and a written quote. No pressure, no obligation.
FAQ – Plumbing
Who can do plumbing work in Washington?
If you’re paying someone to do plumbing work, the installer must be a certified journey-level plumber who is a registered contractor or works for one. Homeowners may do their own plumbing on their own home, but a permit and inspection are still required.
Do I need a permit for plumbing work?
Usually, yes, when you add or move fixtures, run new water or drain lines, or work on gas piping. In Seattle and much of King County, plumbing and gas piping permits come from Public Health – Seattle & King County; in cities like Renton, the city issues them, often the same day.
Can you move my kitchen sink or add an island sink?
Yes. Moving a sink or adding one in an island means new supply and drain lines, venting, and a plumbing permit. We plan it with the layout so the drains slope correctly.
What toilets and showerheads are allowed in Washington?
New toilets may use no more than 1.28 gallons per flush, and showerheads are limited to 1.8 gallons per minute at 80 psi. If one valve controls more than one showerhead, their combined flow can’t exceed 1.8 gpm.
Why does my new shower need a special valve?
Shower valves must protect against sudden temperature swings and limit hot water, so new showers use pressure-balance or thermostatic valves.
Can you run a gas line for a new range?
Yes. Gas piping must be installed by qualified professionals with a permit and inspection. If you’re switching to induction instead, the old gas line is capped and an electrical circuit is added.
Is plumbing included when you remodel my kitchen or bathroom?
Yes. On our kitchen and bathroom remodels, we plan and coordinate the plumbing as part of the project, with the permits and inspections handled.
Can you replace old pipes during a remodel?
Often, yes. When walls or floors are open during a remodel, it’s the easiest time to replace old supply or drain lines in that area.
Which areas do you serve?
Dawn Construction works in 45 cities across King, Snohomish, Pierce, Kitsap, Thurston, Island, Skagit, Whatcom, and Mason counties, from Bellingham to Olympia.
Do you offer free estimates and financing?
Yes. Every project starts with a free in-home estimate and a written quote, and financing is available.
Other Services We Provide
Remodel Plumbing Across 9 Western Washington Counties
From our offices in Renton and Mukilteo, Dawn Construction serves 45 cities, from Bellingham to Olympia. See the full service area.
King County
- Renton
- Seattle
- Bellevue
- Kent
- Federal Way
- Redmond
- Issaquah
- Bothell
- Kirkland
- Sammamish
- Mercer Island
- Newcastle
- Auburn
- Tukwila
- SeaTac
- Burien
- Shoreline
- Kenmore
- Covington
- Maple Valley
Snohomish County
- Mukilteo
- Everett
- Lynnwood
- Marysville
- Arlington
- Monroe
- Snohomish
Pierce County
- Tacoma
- Puyallup
- Lakewood
- Gig Harbor
- Eatonville
Kitsap County
- Bremerton
- Silverdale
- Poulsbo
- Kingston
Thurston County
- Olympia
- Yelm
Island County
- Oak Harbor
- Coupeville
Skagit County
- Mount Vernon
- Burlington
- Sedro-Woolley
Whatcom County
- Bellingham
Mason County
- Shelton
Don't see your city? Contact us or call (206) 672-1711.
Sources
- Public Health – Seattle & King County, Hiring a registered contractor for plumbing and gas piping
- Washington State Register, WSR 21-01-125, Uniform Plumbing Code amendments (toilets, showerheads)
- City of Renton, Residential Interior Remodels
Why Dawn Construction
Licensed & Insured
Fully credentialed for your peace of mind and protection on every project.
Full Team, Real People
Call Sunday–Friday, 8am–10pm and a real person from our team will answer.
Transparent Pricing
No hidden fees or surprise costs. We respect your budget.
Start Your Remodel Plumbing Project
Ready to transform your living space? Reach out for a free, no-obligation estimate.
Ready to Get Started?
Call or email us directly — we're available Sunday–Friday, 8am–10pm and respond fast.
Call (206) 672-1711